 |
Complete set of 4 - 2.5" Silicone Couplers, with Stainless Steel Liner Clamps
These couplers are 3 ply polyester reinforced silicone couplers and include Stainless Steel Liner clamps. These couplers have been made to the SAE J20 specification. We utilize 3 plies of polyester fabric to withstand over 350F continuous for intercooler and intake installations. These couplers have burst pressures up to over 400PSI and come with a LIFETIME warranty against splitting, cracking, tearing or bursting.Only 100% US manufactured premium silicone is used in our products. Thermal Flex hoses are manufactured and tested to meet or exceed the requirements of the SAE J20 R4 Class A Specification. Each hose is hand wrapped and meticulously inspected before being released from the factory. All of our hose products are made with a glossy finish. This simple and easy design promotes easier cleaning and that trick look under the hood.Because of the soft nature of silicone, standard worm gear clamps (the clamps with the tiny slots you can see the hose through) should never be used. The use of this style of clamp on silicone hose creates weak spots as the silicone is squeezed through the slots. This shear is the number one cause of hose failure. This is why we recommend using T-Bolt clamps or Silicone Liner clamps. If you look closely at the picture you can see that our Stainless Liner clamps prevent the silicone hose from actually touching the worm gear. Liner clamps will not jeopardize the concentricity of the seal, nor will they dig in and cut the outer cover of the silicone hose. If you like to take of your car, do yourself a favor and make sure you get the right kind of clamp.All purchases from Tuner Toys are subject to our policies,listed here- Tuner Toys Policy
Suggested Retail Price:
52
Tuner Toys Price:
43.00
|
